Cable Tray

Slotted channels are a type of metal bracket that is used to support ducting. These channels are also sometimes referred to as strut channels. We are the most trusted manufacturer of Z-slotted channel.

C channels are one of the more common types of metal channels and are widely used in construction as building, wall, roof, and ceiling supports. The term C channel encompasses a wide variety of channel types, dimensions, and sizes since sheet metal can be roll formed to fit any specific requirements.

Vertical Bend Inside helps to Change Direction Upward From The Horizontal Plane .Our Product Design Allows The Cable To Route Properly And Chamfer Of Bend Take Care Of Cable Not To Worn Out , Peel Off Or Get Damage While Laying Of Cable.

Horizontal Bend Cable Tray is used for the bending of cable trays. It is not only easy to use but also cost effective. 

Vertical Bend Outside helps to Change Direction Downward From The Horizontal Plane. Our Product Design Allows The Cable To Route Properly And Chamfer Of Bend Take Care Of Cable Not To Worn Out, Peel Off Or Get Damage While Laying Of Cable.

Vertical Bend Outside - Ladder Type Are Mainly Use In Combination With Perforated Type Of Cable Trays To Route The Cable Where The The Direction Changes To A Different Plane. Vertical Bend Outside - Ladder Type Changes Direction Downward From The Horizontal Plane.

Perforated type cable tray tee is basically connector of 2 or 3 cable tray in T shape. It's helpful in junction of 2 or more cable tray.

Cross Bend-Perforated Type Are Mainly Use For Laying The Cable Horizontally Which Allows The Cable To Route From Four End , Our Product Design Allows The Cable To Route Properly And Chamfer Of Bend Take Care Of Cable Not To Worn Out , Peel Off Or Get Damage While Laying Of Cables.

Width 50 mm - 800 mm, Thickness 1.2 mm - 3.0 mm, Height 50 mm - 100 mm 

Threaded rod, as its name suggests, is a metal rod that is threaded throughout the entire length of the rod. It's typically made from carbon and zinc coated. The threading allows for bolts and other types of fixings to be fastened onto the rod to suit many different construction applications.

Coupler plate for cable trays is used for diverse applications to couple different plate interfaces. These plates can be made from different materials as per the specifications of the client. Cable trays are usually connected with an array of components which are made to suit the layout of the structure. A coupler plate is one of the most common tools used to join the cable trays in their respective places. These products are light in weight and help in accurate fitting so the cable trays are stable and durable.

Vertical Bend Inside - Ladder Type Changes Direction Upward From The Horizontal Plane .Our Product Design Allows The Cable To Route Properly And Chamfer Of Bend Take Care Of Cable Not To Worn Out , Peel Off Or Get Damage While Laying Of Cable.

Cable tray covers protect products such as cables from sunlight, environmental elements, dirt, debris, and falling objects. They also provide a safe, sturdy, and slip-proof walking surface.

Reducer Central - Perforated Type Are Mainly Used In Combination With Perforated Type Of Cable Trays To Route The Cable Where Cable Tray Is Suitable For Joining Cable Trays Of Different Widths In The Same Plane. Reducer Central - Perforated Type Has Two Symmetrical Offset Sides .

Cable Tray is a bridge that allows safe transport of wires across open spans and gives protection against the overheating and fire buildup problems. It is a cable management system that is available in a variety of sizes and styles.

Ladder cable tray consists of two longitudinal side members connected by individual transverse members, and is designed for use as a power cable or control cable support system. Ladder and ventilated trays may have solid covers to protect cables from falling objects, dust, and water.

Cross ladder cable tray is generally used where 2-3-4 ladder junctioned on one point and helpful for wire to bend smoothly one side to another.

Our Cable Trunking Raceway are widely used in laying out underground cables and wires. We offer our Raceway in single or multi columns for installation of one or more cable connections simultaneously. Our range is extensively used in Telecommunications, Electronics, Electrical companies and others.

Width 50 mm - 800 mm, Thickness 1.2 mm - 3.0 mm, Height 50 mm - 100 mm 

We offer the most extensive range of perforated type cable trays, which are used for the installation of cables, smaller & controlled cables. These trays can accommodate large number of branch lines and have high load-bearing capacity.

Perforated cable trays can be hung using a center rod support, C-hanger or two-trapeze configuration. They can also be mounted on wall using brackets. For further security, these cable trays are also available with covers. We can also customize the products depending upon the specific requirements.

We offer the most extensive range of perforated type cable trays, which are used for the installation of cables, smaller & controlled cables. These trays can accommodate large number of branch lines and have high load-bearing capacity.

Perforated cable trays can be hung using a center rod support, C-hanger or two-trapeze configuration. They can also be mounted on wall using brackets. For further security, these cable trays are also available with covers. We can also customize the products depending upon the specific requirements.